ACTIVE Foaming Hand Soap Tablets Guide
All the information you need for our foaming hand soap tablets.
Directions
Foaming Hand Soap Tablet Instructions
Fill your foaming soap dispenser with 8oz of warm water
Mix 1 tablet per 8oz of water. Larger soap dispensers will require more water and additional tablets.
Place the tablet in the dispenser
Remove the tablet from the wrapper before using.
Wait 30 Minutes For The Tablet To Dissolve
If there is still a small amount of tablet material at the bottom of the dispenser, don’t worry.
The soap is ready to use after 30 minutes and any remaining parts of the tablet will fully dissolve shortly after.
Use Foaming Soap As Needed To Keep Your Hands Clean
When your dispenser is empty, simply repeat steps 1-3 above.
Usage Tips
- ACTIVE Foaming Soap Tablets can be used in any foaming hand soap dispenser. They will not work in traditional gel soap dispensers.
- If your soap dispenser is larger than 8oz, it will require multiple tablets to refill. Simply use the recipe of 1 tablet per 8oz of water to fill the dispenser.
You can mix the water and tablets in a separate container then pour it into your dispenser until it’s full. Then save the remaining soap mixture to use later.
- The tablet wrappers are fully recyclable so be sure to recycle them after use.
FAQ
Frequently asked questions
These tablets are so easy to use that anyone can do it!
Simply measure 8oz of warm water and pour it into an empty foam soap dispenser. Then add 1 foaming soap tablet. Let the tablet dissolve for 30 minutes and you can begin using the soap!
Larger dispensers may require more water and tablets to refill. Just use 8oz of water with each tablet added.
Yes! ACTIVE foaming soap tablets will work in any foaming hand soap dispenser.
Note: these will not work in standard gel soap dispensers, it must be a foaming soap dispenser.
Yes! ACTIVE foaming soap tablets are made of all natural ingredients and will not irritate sensitive skin.
After waiting 30 minutes, the tablet should be fully dissolved but sometimes there is a small amount of tablet material remaining. That’s ok! You can still begin using the soap and the rest will dissolve soon after.
If your dispenser is larger than 8oz, you will need more water and tablets to fill it. Just follow the recipe of 1 tablet per 8oz.
You can mix the soap and water in a separate container, fill the dispenser, then save the remaining soap mix for later.
SAVE
15% off
Your Next ACTIVE
Purchase on Amazon
Limited Time Offer
Questions or concerns?
We're Here To Help!
Please fill out the form below and we’ll get back to you as soon as possible with an answer.
By clicking “submit” you agree to our privacy policy.