ACTIVE RV Holding Tank Digester Treatment Guide
All the information you need for our RV holding tank digester treatment.
Directions
RV Holding Tank Digester Treatment Instructions
Ensure Your Tank Is Empty
Whether you’re treating a black water or gray water holding tank (or both), ACTIVE RV Holding Tank Digester Treatment works best when added to an empty tank.
Add The Treatment Liquid
2oz of ACTIVE treats a 40 gallon tank.
Black Water Tanks
Pour 2-4oz of treatment liquid directly into the toilet.
Gray Water Tanks
Pour 2-4oz of treatment liquid down the sink or shower drain.
Flush The Treatment Into The Tank
Black Water Tanks
Press the flush lever on the toilet for 10-15 seconds to fully flush the treatment into the tank.
Gray Water Tanks
Run 1-2 gallons of water through the sink or shower (wherever you added the treatment) to fully rinse it down the drain.
Enjoy Your RV Experience
All that’s left to do is enjoy your time in an odor-free and clog-free RV, camper or boat!
Just remember to add ACTIVE RV Holding Tank Digester Treatment next time you empty your tank.
Usage Tips
- This treatment works best when added to an empty tank. This way, the treatment liquid is able to mix with the waste as it enters the holding tank.
- Larger holding tanks require more treatment liquid. Use the ratio of 2oz of ACTIVE treatment per 40 gallons of tank size for best results.
- Weather conditions can affect the performance of the holding tank treatment’s effectiveness on odors. In warmer temperatures, you may need to increase the amount of treatment liquid used for better performance.
FAQ
Frequently asked questions
ACTIVE RV Holding Tank Digester Treatment is completely safe to use. The bacteria is non-pathogenic and cultivated here in the USA.
The recommended usage amount depends on the size of your tank. Simply follow the ratio below for treatment usage:
2oz of ACTIVE Holding Tank Treatment per 40 gallons of tank size.
A 60 gallon holding tank would require 3oz of treatment liquid, 80 gallon tanks require 4oz of treatment, and so on.
We recommend adding the digester treatment liquid to an empty tank for best results. This way, the treatment is at the bottom of the tank and can treat any waste that gets added on top of it.
Yes, you can add our digester treatment at any time. However, adding the treatment to a holding tank that already has waste in it will yield less effective results.
Why is this? When the treatment is added on top of existing waste, it’s difficult for it to permeate and treat the waste below it – especially in black tanks that contain solid waste. That’s why we recommend adding it to an empty tank so it mixes with the waste as it enters the tank.
This product is not intended for cleaning or sterilizing holding tanks – it is designed to liquify and digest the waste inside of the tank.
SAVE
15% off
Your Next ACTIVE
Purchase on Amazon
Limited Time Offer
Questions or concerns?
We're Here To Help!
Please fill out the form below and we’ll get back to you as soon as possible with an answer.
By clicking “submit” you agree to our privacy policy.